Click image to view full size image
1. High strength increasing bearing capacity.
2. Good wearing quality.
3. Quick heat radiation.
4. Pretty elasticity.
2. Good wearing quality.
3. Quick heat radiation.
4. Pretty elasticity.
| SPECIFICATION | LAY DIRECTION | LAY LENGTH | DIAMETER | LINEAR DENSITY | BREAKING FORCE |
| mm±5% | mm | g/m | N ≥ | ||
| 3+9+15×0.175+0.15 | S/S/Z/S | 5/10/16/3.5 | 1.34±0.06 | 5.42±0.190 | 1680 |
| 3+9+15×0.22+0.15 | S/S/Z/S | 6.3/12.5/18/3.5 | 1.62±0.08 | 8.5±0.300 | 2600 |
| 3×4×0.22HE | S/S | 3.0/6.3 | 1.14±0.07 | 3.96±0.200 | 945 |
| 3×7×0.20HE | S/S | 3.9/6.3 | 1.14±0.07 | 5.770±0.230 | 1325 |
| 3+9×0.22+0.15HT | S/S/Z | 6.3/12.5/3.5 | 1.17±0.06 | 3.85±0.19 | 1410 |
| 3×0.20+6×0.35HT | S/Z | 10.0/18.0 | 1.12±0.06 | 5.34±0.27 | 1850 |
| 3+8×0.33HT | S/S | 10.0/18.0 | 1.36±0.07 | 7.84±0.37 | 2650 |